Home - Return to Previous Page
Additional Images

Gates 20G4022 G Force CVT Drive Belt High Performance

See below to confirm fitment.

20G4022
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $90.00

Application Detail

YearsMakeModelSubmodelNotes
1994 - 1995Polaris3002x4
1994 - 1995Polaris3004X4
1994 - 1995Polaris400L2x4
1994 - 1994Polaris400L4X4
2004 - 2005PolarisATP 3304X4
1989 - 1992PolarisBig Boss 2504x6
1991 - 1993PolarisBig Boss 2506x6
1994 - 1994PolarisBig Boss 3006x6
1993 - 1993PolarisBig Boss 350L6x6
1994 - 1997PolarisBig Boss 400L6x6
1998 - 1999PolarisBig Boss 5006x6
1987 - 1987PolarisCyclone 250X--
2000 - 2002PolarisMagnum 3252x4Without EBS
2000 - 2002PolarisMagnum 3254X4Without EBS
2003 - 2004PolarisMagnum 3302x4Without EBS
2005 - 2005PolarisMagnum 3302x4
2003 - 2004PolarisMagnum 3304X4Without EBS
2005 - 2006PolarisMagnum 3304X4
1995 - 1997PolarisMagnum 4252x4
1998 - 1998PolarisMagnum 4252x4Without EBS
1995 - 1997PolarisMagnum 4254X4
1998 - 1998PolarisMagnum 4254X4Without EBS
1996 - 1997PolarisMagnum 4256x6
2000 - 2000PolarisMagnum 5004X4Without EBS
2001 - 2004PolarisRanger 4252x4
2005 - 2009PolarisRanger 5002x4
2001 - 2007PolarisRanger 5004X4
2006 - 2009PolarisRanger 5004x4 EFI
2010 - 2010PolarisRanger 5004x4 HO EFI
1985 - 1986PolarisScrambler 250--
2000 - 2002PolarisScrambler 4002x4
1995 - 2002PolarisScrambler 4004X4
2001 - 2002PolarisScrambler 5002x4
1997 - 2012PolarisScrambler 5004X4
1994 - 1997PolarisSport 400L--
1998 - 1999PolarisSportsman 335--
2000 - 2000PolarisSportsman 3354X4
1994 - 2005PolarisSportsman 4004X4
2011 - 2013PolarisSportsman 4004x4 HO
2014 - 2014PolarisSportsman 400HO
2006 - 2007PolarisSportsman 4504X4
1996 - 1997PolarisSportsman 5004X4
1998 - 2000PolarisSportsman 5004X4Without EBS
2002 - 2002PolarisSportsman 5004x4 HOWithout EBS
2006 - 2013PolarisSportsman 5004x4 HO
2007 - 2007PolarisSportsman 5004x4 HO EFI
2000 - 2008PolarisSportsman 5006x6
1990 - 2006PolarisTrail Blazer 250--
2008 - 2013PolarisTrail Blazer 330--
2003 - 2003PolarisTrail Blazer 400--
1994 - 1999PolarisTrail Boss 250--
1991 - 1993PolarisTrail Boss 2502x4
1987 - 1987PolarisTrail Boss 2504X4
2000 - 2002PolarisTrail Boss 325--
2003 - 2013PolarisTrail Boss 330--
1990 - 1993PolarisTrail Boss 350L2x4
1990 - 1993PolarisTrail Boss 350L4X4
1999 - 1999PolarisWorker 335--
1999 - 1999PolarisWorker 500--
2001 - 2001PolarisWorker 500--Without EBS
2000 - 2002PolarisXplorer 2504X4
1996 - 1999PolarisXplorer 3004X4
1999 - 2001PolarisXplorer 4004X4
1998 - 1998PolarisXplorer 400L--
1997 - 1997PolarisXplorer 5004X4
1996 - 1999PolarisXpress 300--
1996 - 1997PolarisXpress 400L--

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W10.0000” x H1.0000” x L8.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.