Home - Return to Previous Page
Additional Images

Gates 24C4022 G Force C12 CVT Carbon Drive Belt

See below to confirm fitment.

24C4022
For over a century, Gates has driven innovation in belt technology to power the machines that move you. Gates G-Force® C12® CVT belt drives are engineered to navigate the toughest off-road trails with power and efficiency. The industry's first CVT belt with carbon tensile cord also features a trapezoid top-notch and rounded cog design for superior flexibility and heat dissipation, along with a unique gum adhesion that reduces fiber pullout within the belt extending the life of the belt. Gates combines material science and process engineering to create innovative products that provide performance, reliability and the strength to withstand even the most challenging off-road environments.

  • Advanced carbon cord results in minimal stretch with extraordinary strength for faster acceleration.
  • Trapezoidal top cog with rounded bottom cog provides excellent flexibility and efficiency.
  • Aramid fiber loaded elastomer compound for durability and optimized performance.
  • Gains optimal power transmission for fast acceleration, improved throttle response, and consistent shifting performance.
  • Maintains peak power throughout the shift curve.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Limited Supply: only 2 remaining
Pricing: $131.70
Qty:
Free Shipping!

Application Detail

YearsMakeModelSubmodelNotes
2012 - 2016PolarisRanger 8006x6
2010 - 2014PolarisRanger 8006x6 EFI
2013 - 2014PolarisRanger 800EFI
2008 - 2009PolarisRanger Crew 700--
2013 - 2014PolarisRanger Crew 800--
2010 - 2012PolarisRanger Crew 8004x4 EFI
2009 - 2009PolarisRanger HD 7004x4 EFI
2010 - 2010PolarisRanger HD 8004x4 EFI
2011 - 2011PolarisRanger HD 8004x4 EFI EPS
2012 - 2012PolarisRanger HD 8004x4 EPS
2008 - 2009PolarisRanger XP 7004x4 EFI
2012 - 2012PolarisRanger XP 8004X4
2010 - 2011PolarisRanger XP 8004x4 EFI
2011 - 2011PolarisRanger XP 8004x4 EFI EPS
2012 - 2012PolarisRanger XP 8004x4 EPS
2012 - 2013PolarisRZR 4 800--
2013 - 2013PolarisRZR 800EFI
2011 - 2011PolarisRZR 800EFI EPS
2010 - 2013PolarisRZR S 800EFI
2011 - 2011PolarisRZR SW 800Military
2008 - 2008PolarisSportsman X2 700EFI

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.