Home - Return to Previous Page
Additional Images

Gates 29G3596 G Force CVT Drive Belt High Performance

Drive Belt

29G3596
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Limited Supply: only 2 remaining
Pricing: $105.97
Qty:
Free Shipping!

Application Detail

YearsMakeModelSubmodelNotes
2009 - 2012YamahaGrizzly 550YFM550FG 4x4 FI
2009 - 2012YamahaGrizzly 550YFM550FGH 4x4 Hunter Edition FI
2009 - 2012YamahaGrizzly 550YFM550FGP 4x4 FI EPS
2009 - 2012YamahaGrizzly 550YFM550FGPH 4x4 Hunter Edition FI EPS
2009 - 2009YamahaGrizzly 550YFM550FGPSE 4x4 Special Edition FI EPS
2002 - 2003YamahaGrizzly 660YFM660F 4x4
2003 - 2003YamahaGrizzly 660YFM660F 4x4 Limited Edition
2005 - 2006YamahaGrizzly 660YFM660FA 4x4
2006 - 2006YamahaGrizzly 660YFM660FAH 4x4 Hardwoods Hunter Edition
2005 - 2005YamahaGrizzly 660YFM660FAH 4x4 Hunter Edition
2006 - 2006YamahaGrizzly 660YFM660FAH 4x4 Outdoorsman Edition
2006 - 2006YamahaGrizzly 660YFM660FAHD 4x4 Ducks Unlimited Edition
2005 - 2005YamahaGrizzly 660YFM660FAHW 4x4 Wetlands Hunter Edition
2005 - 2006YamahaGrizzly 660YFM660FASE 4x4 Special Edition
2003 - 2003YamahaGrizzly 660YFM660FH 4x4 Hardwoods Hunter Edition
2002 - 2002YamahaGrizzly 660YFM660FH 4x4 Hunter Edition
2003 - 2003YamahaGrizzly 660YFM660FHW 4x4 Wetlands Hunter Edition
2014 - 2014YamahaGrizzly 700YFM700D 4x4 FI
2014 - 2014YamahaGrizzly 700YFM700DHH 4x4 Hunter Edition FI
2007 - 2007YamahaGrizzly 700YFM700FG 4x4 Exploring Edition FI
2008 - 2013YamahaGrizzly 700YFM700FG 4x4 FI
2009 - 2013YamahaGrizzly 700YFM700FGH 4x4 Hunter Edition FI
2007 - 2007YamahaGrizzly 700YFM700FGP 4x4 FI
2007 - 2015YamahaGrizzly 700YFM700FGP 4x4 FI EPS
2007 - 2008YamahaGrizzly 700YFM700FGPDU 4x4 Ducks Unlimited Edition FI
2009 - 2009YamahaGrizzly 700YFM700FGPDU 4x4 Ducks Unlimited Edition FI EPS
2007 - 2008YamahaGrizzly 700YFM700FGPH 4x4 Hunter Edition FI
2009 - 2013YamahaGrizzly 700YFM700FGPH 4x4 Hunter Edition FI EPS
2007 - 2007YamahaGrizzly 700YFM700FGPOH 4x4 Outdoorsman Edition FI
2007 - 2007YamahaGrizzly 700YFM700FGPSE 4x4 Special Edition FI
2009 - 2015YamahaGrizzly 700YFM700FGPSE 4x4 Special Edition FI EPS
2014 - 2018YamahaGrizzly 700YFM700P 4x4 FI EPS
2015 - 2015YamahaGrizzly 700YFM700PHFH 4x4 Hunter Edition FI EPS
2014 - 2014YamahaGrizzly 700YFM700PHH 4x4 Hunter Edition FI EPS
2016 - 2018YamahaGrizzly 700YFM700PLE 4x4 Limited Edition FI EPS
2014 - 2018YamahaGrizzly 700YFM700PSE 4x4 Special Edition FI EPS
2017 - 2018YamahaKodiak 700YFM700K 4x4 FI
2017 - 2017YamahaKodiak 700YFM700KP 4x4 FI EPS
2017 - 2017YamahaKodiak 700YFM700KPSE 4x4 Special Edition FI EPS

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.