Home - Return to Previous Page
Additional Images

Gates 27G3450 G Force CVT Drive Belt High Performance

Drive Belt

27G3450
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $110.95

Application Detail

YearsMakeModelSubmodelNotes
2007 - 2007SuzukiKing Quad 450LTA450FC 4x4 Special Edition
2007 - 2010SuzukiKing Quad 450LTA450X 4x4 AXi
2009 - 2009SuzukiKing Quad 450LTA450XZ 4x4 Limited AXi
2008 - 2008SuzukiKing Quad 450LTA450XZ 4x4 Special Edition AXi
2010 - 2016SuzukiKing Quad 500LTA500X 4x4 AXi
2009 - 2016SuzukiKing Quad 500LTA500XP 4x4 AXi EPS
2016 - 2016SuzukiKing Quad 500LTA500XP 4x4 AXi SE EPS
2013 - 2013SuzukiKing Quad 500LTA500XPZ 4x4 30th Anniversary Edition AXi EPS
2009 - 2014SuzukiKing Quad 500LTA500XPZ 4x4 Limited AXi EPS

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W10.0000” x H1.0000” x L8.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.