Home - Return to Previous Page
Gates
Additional Images

Gates 30G3750 G Force CVT Drive Belt High Performance

Drive Belt

(0) Reviews: Write first review
30G3750
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $92.98

Application Detail

YearsMakeModelSubmodelNotes
2006 - 2006BombardierOutlander 8004x4 EFI HO
2006 - 2006BombardierOutlander 8004x4 XT EFI HO
2006 - 2006BombardierOutlander Max 8004x4 EFI HO
2011 - 2014Can-AmCommander 10004X4
2013 - 2013Can-AmCommander 10004x4 LTD
2011 - 2011Can-AmCommander 10004x4 X
2011 - 2011Can-AmCommander 10004x4 XT
2011 - 2011Can-AmCommander 800R4X4
2015 - 2015Can-AmCommander 800R4x4 XT
2015 - 2015Can-AmCommander Max 10004x4 XT
2013 - 2016Can-AmMaverick 1000R4X4
2015 - 2015Can-AmMaverick 1000R4x4 XMR DPS
2015 - 2015Can-AmMaverick 1000R4x4 XXC DPS
2014 - 2015Can-AmMaverick Max 1000R4X4
2015 - 2015Can-AmOutlander 10004x4 DPS
2015 - 2015Can-AmOutlander 10004x4 XMR
2015 - 2015Can-AmOutlander 10004x4 XT
2015 - 2016Can-AmOutlander 10006x6 XT
2016 - 2016Can-AmOutlander 1000R4x4 DPS
2015 - 2015Can-AmOutlander 5004x4 DPS
2015 - 2015Can-AmOutlander 5004x4 XT
2007 - 2008Can-AmOutlander 5004x4 XT HO EFI
2016 - 2016Can-AmOutlander 5704x4 DPS
2015 - 2016Can-AmOutlander 6504X4
2007 - 2008Can-AmOutlander 6504x4 HO EFI
2015 - 2015Can-AmOutlander 6504x4 XMR
2015 - 2015Can-AmOutlander 6504x4 XT
2007 - 2008Can-AmOutlander 6504x4 XT HO EFI
2015 - 2016Can-AmOutlander 6506x6 XT
2007 - 2008Can-AmOutlander 8004x4 HO EFI
2007 - 2008Can-AmOutlander 8004x4 XT HO EFI
2015 - 2015Can-AmOutlander 800R4X4
2015 - 2015Can-AmOutlander 800R4x4 DPS
2011 - 2011Can-AmOutlander 800R4x4 XMR
2015 - 2015Can-AmOutlander 800R4x4 XT
2016 - 2016Can-AmOutlander 8504x4 DPS
2016 - 2016Can-AmOutlander 8504x4 XT DPS
2015 - 2015Can-AmOutlander L 5004X4
2016 - 2016Can-AmOutlander L 5704X4
2016 - 2016Can-AmOutlander L 5704x4 XMR DPS
2015 - 2015Can-AmOutlander L MAX 5004X4
2016 - 2016Can-AmOutlander L MAX 5704X4
2015 - 2015Can-AmOutlander Max 10004x4 DPS
2015 - 2015Can-AmOutlander Max 10004x4 LTD
2015 - 2015Can-AmOutlander Max 10004x4 XT
2016 - 2016Can-AmOutlander Max 1000R4x4 LTD DPS
2016 - 2016Can-AmOutlander Max 1000R4x4 XT DPS
2012 - 2012Can-AmOutlander Max 5004X4
2015 - 2015Can-AmOutlander Max 5004x4 DPS
2007 - 2008Can-AmOutlander Max 5004x4 HO EFI
2015 - 2015Can-AmOutlander Max 5004x4 XT
2007 - 2008Can-AmOutlander Max 5004x4 XT HO EFI
2016 - 2016Can-AmOutlander Max 5704x4 DPS
2016 - 2016Can-AmOutlander Max 5704x4 XT DPS
2015 - 2015Can-AmOutlander Max 6504X4
2015 - 2015Can-AmOutlander Max 6504x4 DPS
2007 - 2008Can-AmOutlander Max 6504x4 HO EFI
2015 - 2015Can-AmOutlander Max 6504x4 XT
2011 - 2013Can-AmOutlander Max 6504x4 XT EFI
2007 - 2008Can-AmOutlander Max 6504x4 XT HO EFI
2007 - 2008Can-AmOutlander Max 8004x4 HO EFI
2007 - 2008Can-AmOutlander Max 8004x4 LTD HO EFI
2007 - 2008Can-AmOutlander Max 8004x4 XT HO EFI
2015 - 2015Can-AmOutlander Max 800R4x4 DPS
2016 - 2016Can-AmOutlander Max 8504x4 XT DPS
2015 - 2015Can-AmRenegade 10004X4
2016 - 2016Can-AmRenegade 1000R4X4
2016 - 2016Can-AmRenegade 1000R4x4 XXC DPS
2015 - 2015Can-AmRenegade 5004X4
2016 - 2016Can-AmRenegade 5704X4
2008 - 2008Can-AmRenegade 8004x4 HO EFI
2015 - 2015Can-AmRenegade 800R4X4
2009 - 2014Can-AmRenegade 800R4x4 EFI
2015 - 2015Can-AmRenegade 800R4x4 XXC
2010 - 2012Can-AmRenegade 800R4x4 XXC EFI
2016 - 2016Can-AmRenegade 8504X4
2016 - 2016Can-AmRenegade 8504x4 XXC DPS

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.