Home - Return to Previous Page
Additional Images

Gates 40G4340 G Force CVT Drive Belt High Performance

Drive Belt

40G4340
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $81.90

Application Detail

YearsMakeModelSubmodelNotes
2008 - 2015YamahaApexRX10P
2011 - 2015YamahaApexRX10PS SE
2008 - 2015YamahaApexRX10R
2006 - 2007YamahaApex ERRX10R
2008 - 2008YamahaApex ERRX10RTR
2006 - 2010YamahaApex GTRX10GT
2008 - 2008YamahaApex GTRX10GTA 40th Anniversary
2008 - 2010YamahaApex LTXRX10LT
2008 - 2010YamahaApex LTX GTRX10LTGT
2008 - 2008YamahaApex LTX GTRX10LTGTA 40th Anniversary
2006 - 2007YamahaApex MountainRX10M
2007 - 2007YamahaApex MountainRX10MS SE
2008 - 2010YamahaApex MTXRX10MT
2008 - 2008YamahaApex MTXRX10MTA SE 40th Anniversary
2006 - 2009YamahaApex RTXRX10RT
2006 - 2007YamahaApex RTXRX10RT Reverse
2007 - 2007YamahaApex RTX ERRX10RTR
2011 - 2015YamahaApex XTXRX10PX
2006 - 2007YamahaAttakRXW10
2007 - 2007YamahaAttak GTRXW10GT
2008 - 2013YamahaFX NytroFX10
2012 - 2013YamahaFX Nytro MTXFX10M 153in
2012 - 2013YamahaFX Nytro MTXFX10M 162in
2010 - 2011YamahaFX Nytro MTXFX10M SE 153in
2008 - 2010YamahaFX Nytro MTXFX10MT
2008 - 2008YamahaFX Nytro MTXFX10MTR Reverse
2008 - 2008YamahaFX Nytro MTXFX10MTRA 40th Anniversary
2010 - 2011YamahaFX Nytro MTXFX10MTS SE 162in
2010 - 2011YamahaFX Nytro MTXSE FX10MTS 153in
2008 - 2008YamahaFX Nytro RTXFX10RT
2009 - 2013YamahaFX Nytro RTXFX10RTR
2008 - 2008YamahaFX Nytro RTXFX10RTR Reverse
2008 - 2008YamahaFX Nytro RTXFX10RTRA 40th Anniversary
2009 - 2010YamahaFX Nytro RTXFX10RTRS SE
2009 - 2013YamahaFX Nytro XTXFX10XT
2013 - 2013YamahaFX Nytro XTXFX10XT 1.75
2012 - 2012YamahaFX Nytro XTXFX10XT Backcountry
1999 - 2002YamahaMountain Max 600MM600
1998 - 2003YamahaMountain Max 700MM700
1998 - 1998YamahaMountain SRX 700MSRX700
2006 - 2007YamahaNytro ERRS90NR
2007 - 2009YamahaPhazerPZ50
2007 - 2007YamahaPhazer FXPZ50FX
2007 - 2013YamahaPhazer GTPZ50GT
2007 - 2007YamahaPhazer Mountain LitePZ50MT
2008 - 2015YamahaPhazer MTXPZ50MT
2008 - 2015YamahaPhazer RTXPZ50RTX
2015 - 2015YamahaPhazer XTXPZ50XT
2005 - 2007YamahaRS RageRSG90
2005 - 2006YamahaRS VectorRS90
2008 - 2015YamahaRS VectorRS90P
2008 - 2015YamahaRS VectorRS90R
2009 - 2011YamahaRS Vector GTRS90GT
2009 - 2013YamahaRS Vector LTXRS90LT
2009 - 2011YamahaRS Vector LTX GTRS90LTGT
2005 - 2015YamahaRS VentureRST90
2009 - 2013YamahaRS Venture GTRST90GT
2013 - 2013YamahaRS Venture TFRS10
2008 - 2015YamahaRS Viking ProfessionalVK10
2004 - 2005YamahaRX WarriorRXW10
2003 - 2005YamahaRX1RX10
2003 - 2005YamahaRX1 MountainRX10M
1998 - 1999YamahaSRX600--
1998 - 2002YamahaSRX700--
2004 - 2006YamahaSX VenomSXV60
2004 - 2006YamahaSX Venom ERSXV60ER
2002 - 2003YamahaSX ViperSXV700
2002 - 2004YamahaSX Viper ERSXV700ER
2003 - 2006YamahaSX Viper MountainSXV70MH
2004 - 2004YamahaSX Viper SSXV700
1999 - 2000YamahaVenture 500 XLVT500XL
1999 - 2006YamahaVenture 600VT600
1998 - 2004YamahaVenture 700VT700
2007 - 2013YamahaVenture LitePZ50VT
2007 - 2007YamahaVK ProfessionalVK10
2000 - 2000YamahaVMAX 500VX500
2000 - 2000YamahaVMAX 500VX500DX Deluxe
1999 - 1999YamahaVMAX 500 SXVX500SX
1999 - 1999YamahaVMAX 600VX600
2000 - 2001YamahaVMAX 600VX600DX Deluxe
2002 - 2003YamahaVMAX 600 ERVX600ER
1999 - 1999YamahaVMAX 600 SXVX600SX
1999 - 2001YamahaVMAX 700VX700
1999 - 2001YamahaVMAX 700VX700DX Deluxe
2002 - 2002YamahaVMAX 700 ERVX700ER
1998 - 1999YamahaVMAX 700 SXVX700SX
1998 - 1998YamahaVMAX 700 XTVX700XT
1998 - 1998YamahaVMAX 700 XTCVX700XTC
1998 - 1998YamahaVMAX 700 XTCDVX700XTC Deluxe

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.