Home - Return to Previous Page
Additional Images

Gates 43G4340 G Force CVT Drive Belt High Performance

Drive Belt

43G4340
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $107.96

Application Detail

YearsMakeModelSubmodelNotes
2006 - 2006Arctic CatF5 Firecat 500--
2006 - 2006Arctic CatF5 Firecat 500Sno Pro
2006 - 2006Arctic CatF6 Firecat 600EFI
2006 - 2006Arctic CatF6 Firecat 600Sno Pro EFI
2006 - 2006Arctic CatF7 Firecat 700EFI
2006 - 2006Arctic CatF7 Firecat 700Sno Pro
2006 - 2006Arctic CatF7 Firecat 700Sno Pro EFI
2006 - 2006Arctic CatF7 Firecat 700Tony Stewart EFI
1991 - 1993YamahaExciter IIEX570
1991 - 1993YamahaExciter II LEEX570E
1993 - 1993YamahaExciter II STEX570ST
1993 - 1993YamahaExciter II SXEX570SX
1997 - 1998YamahaMountain Max 600MM600
1997 - 1998YamahaMountain Max 700MM700
1999 - 2001YamahaPhazer 500PZ500
2001 - 2001YamahaPhazer 500PZ500DX Deluxe
1993 - 1996YamahaPhazer IIPZ480
1993 - 1995YamahaPhazer II LEPZ480E
1996 - 1999YamahaPhazer Mountain LitePZ480ST
2000 - 2001YamahaPhazer Mountain LitePZ500ML
1997 - 1998YamahaPhazer SSPZ480
1997 - 1998YamahaPhazer SSPZ480E Electric
2000 - 2001YamahaSX500R--
1997 - 2001YamahaVenture 500VT500
1997 - 1998YamahaVenture 600VT600
1992 - 1993YamahaVenture GTVT480GT
1996 - 1998YamahaVenture TRVT480TR
1992 - 1997YamahaVenture XLVT480
1993 - 2005YamahaVK540III
1994 - 1996YamahaVMAX 500VX500
1994 - 1996YamahaVMAX 500 DXVX500DX
1994 - 1996YamahaVMAX 500 LEVX500E
1994 - 1994YamahaVMAX 500 STVX500ST
1997 - 1998YamahaVMAX 500 XTVX500XT
1997 - 1998YamahaVMAX 500 XTCVX500XTC
1998 - 1998YamahaVMAX 500 XTCVX500XTCD Deluxe
1994 - 1997YamahaVMAX 600VX600
1994 - 1996YamahaVMAX 600 DXVX600DX
1994 - 1996YamahaVMAX 600 LEVX600E
1996 - 1996YamahaVMAX 600 Mountain MaxVX600ST
1994 - 1995YamahaVMAX 600 STVX600ST
1997 - 1999YamahaVMAX 600 SXVX600SX
1997 - 1998YamahaVMAX 600 XTVX600XT
1997 - 1998YamahaVMAX 600 XTCVX600XTC
1997 - 1997YamahaVMAX 600 XTCVX600XTC Reverse
1997 - 1997YamahaVMAX 700 SXVX700SX

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.