Home - Return to Previous Page
Additional Images

Gates 48G4553 G Force CVT Drive Belt High Performance

Drive Belt

48G4553
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $95.45

Application Detail

YearsMakeModelSubmodelNotes
2006 - 2007Arctic CatT660Touring
2006 - 2006Arctic CatT660Turbo
2006 - 2006Arctic CatT660Turbo LE
2006 - 2006Arctic CatT660Turbo ST
2006 - 2007Arctic CatT660Turbo Touring
2006 - 2007Arctic CatT660Turbo Touring LE
2006 - 2007Arctic CatT660Turbo Trail
2006 - 2007Arctic CatT660Turbo Trail LE
2008 - 2008Polaris340--
2008 - 2008Polaris340Transport
2008 - 2008Polaris550LX
2004 - 2006PolarisClassic 340--
2001 - 2006PolarisClassic 500--
2001 - 2003PolarisClassic 500Touring
2002 - 2006PolarisClassic 550--
2002 - 2002PolarisDeluxe 340--
2009 - 2010PolarisDragon 800--
2009 - 2009PolarisDragon 800146in
2008 - 2008PolarisDragon IQ 600--
2010 - 2010PolarisDragon IQ 800--
2007 - 2007PolarisDragon RMK 700155in
2008 - 2010PolarisDragon RMK 800155in
2008 - 2010PolarisDragon RMK 800163in
2009 - 2009PolarisDragon SP 600--
2009 - 2009PolarisDragon SP 800--
2008 - 2010PolarisDragon Switchback 600--
2009 - 2010PolarisDragon Switchback 800--
2003 - 2003PolarisEdge 340--
2003 - 2003PolarisEdge Classic 340--
2004 - 2004PolarisIndy 340--
2001 - 2001PolarisIndy 340Deluxe
2001 - 2007PolarisIndy 340Touring
2002 - 2006PolarisIndy 500--
2007 - 2007PolarisIQ 600HO
2007 - 2007PolarisIQ 600HO CFI
2007 - 2007PolarisIQ 600HO LX CFI
2009 - 2010PolarisIQ 800--
2009 - 2012PolarisIQ Shift 600--
2009 - 2009PolarisIQ Shift 600136in
2008 - 2008PolarisIQ Touring 600HO
2007 - 2007PolarisLX340--
2007 - 2007PolarisLX550--
2011 - 2011PolarisPro RMK 800155in
2011 - 2011PolarisPro RMK 800163in
2002 - 2003PolarisPro X 440--
2002 - 2003PolarisPro X 440Fan
2004 - 2004PolarisPRO X 550Fan
2004 - 2004PolarisPRO XR 440--
2011 - 2011PolarisRMK 600144in
2011 - 2011PolarisRMK 600155in
2002 - 2002PolarisRMK 700136in
2002 - 2006PolarisRMK 700144in
2002 - 2006PolarisRMK 700151in
2008 - 2009PolarisRMK 700155in
2006 - 2006PolarisRMK 700159in
2010 - 2010PolarisRMK Assault 800--
2009 - 2009PolarisRMK Assault 800146in
2009 - 2009PolarisRMK Shift 600144in
2009 - 2009PolarisRMK Shift 600155in
2011 - 2011PolarisRush 800--
2011 - 2011PolarisRush 800Pro R
2004 - 2004PolarisSportTouring
2002 - 2005PolarisSuper Sport--
2006 - 2008PolarisSuper Sport 550--
2001 - 2001PolarisSupersport--
2004 - 2008PolarisSwitchBack 700--
2004 - 2011PolarisSwitchBack 800--
2002 - 2006PolarisTouring 340--
2004 - 2008PolarisTrailRMK
2004 - 2006PolarisTrailTouring
2005 - 2008PolarisTrailTouring Deluxe
2009 - 2009PolarisTransport 550--
2005 - 2005Ski-DooExpedition 600TUV
2006 - 2008Ski-DooExpedition 600TUV HO SDI
2005 - 2006Ski-DooExpedition V1000TUV
2008 - 2008Ski-DooExpedition V800Sport
2008 - 2008Ski-DooExpedition V800TUV V
2004 - 2004Ski-DooSkandic 550FSport
2004 - 2006Ski-DooSkandic 550FSUV
2004 - 2006Ski-DooSkandic 550FSWT
2004 - 2014Ski-DooSkandic 550FWT
2008 - 2008Ski-DooSkandic 600SUV HO SDI
2008 - 2009Ski-DooSkandic 600WT
2009 - 2009Ski-DooSkandic V800SWT
2009 - 2009Ski-DooSkandic V800Tundra LT

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.