Home - Return to Previous Page
Additional Images

Gates 38G4494 G Force CVT Drive Belt High Performance

Drive Belt

38G4494
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $100.15

Application Detail

YearsMakeModelSubmodelNotes
2016 - 2017Arctic CatBearcat 3000LT
2014 - 2014Arctic CatM9000153in
2014 - 2015Arctic CatM9000HCR 162in
2016 - 2016Arctic CatM9000Limited
2014 - 2015Arctic CatM9000Limited 162in
2016 - 2016Arctic CatM9000Sno Pro
2014 - 2014Arctic CatM9000Sno Pro 162in
2016 - 2017Arctic CatPantera 3000--
2012 - 2013Arctic CatProclimb M1100153in
2012 - 2012Arctic CatProclimb M1100Sno Pro 153in
2012 - 2012Arctic CatProclimb M1100Sno Pro 50th 153in
2012 - 2012Arctic CatProclimb M1100Sno Pro Limited 153in
2012 - 2013Arctic CatProclimb M1100Turbo 153in
2012 - 2012Arctic CatProclimb M1100Turbo HCR
2013 - 2013Arctic CatProclimb M1100Turbo HCR 162in
2012 - 2013Arctic CatProclimb M1100Turbo Sno Pro 162in
2012 - 2012Arctic CatProclimb M1100Turbo Sno Pro 50th 162in
2012 - 2013Arctic CatProclimb M1100Turbo Sno Pro Limited 162in
2012 - 2013Arctic CatProclimb XF1100Turbo Sno Pro High Country
2013 - 2013Arctic CatProclimb XF1100Turbo Sno Pro High Country Limited
2012 - 2013Arctic CatProcross F1100LXR
2012 - 2013Arctic CatProcross F1100Sno Pro
2012 - 2012Arctic CatProcross F1100Sno Pro 50th
2012 - 2013Arctic CatProcross F1100Sno Pro Limited
2013 - 2013Arctic CatProcross F1100Sno Pro RR
2012 - 2013Arctic CatProcross F1100Turbo LXR
2012 - 2013Arctic CatProcross F1100Turbo Sno Pro
2012 - 2012Arctic CatProcross F1100Turbo Sno Pro 50th
2012 - 2013Arctic CatProcross F1100Turbo Sno Pro Limited
2013 - 2013Arctic CatProcross F1100Turbo Sno Pro RR
2013 - 2013Arctic CatProcross XF1100Cross Tour
2012 - 2013Arctic CatProcross XF1100LXR
2012 - 2013Arctic CatProcross XF1100Sno Pro
2012 - 2012Arctic CatProcross XF1100Sno Pro 50th
2012 - 2013Arctic CatProcross XF1100Sno Pro Limited
2013 - 2013Arctic CatProcross XF1100Turbo Cross Tour
2012 - 2013Arctic CatProcross XF1100Turbo LXR
2012 - 2013Arctic CatProcross XF1100Turbo Sno Pro
2012 - 2012Arctic CatProcross XF1100Turbo Sno Pro 50th
2012 - 2013Arctic CatProcross XF1100Turbo Sno Pro Limited
2015 - 2015Arctic CatXF 9000Cross Country Limited
2014 - 2014Arctic CatXF 9000Cross Country Sno Pro
2014 - 2015Arctic CatXF 9000Cross Tour
2016 - 2016Arctic CatXF 9000Crosstrek
2014 - 2016Arctic CatXF 9000High Country Limited
2014 - 2014Arctic CatXF 9000High Country Sno Pro
2014 - 2015Arctic CatXF 9000Limited
2014 - 2015Arctic CatXF 9000LXR
2014 - 2015Arctic CatXF 9000Sno Pro
2014 - 2017Arctic CatZR 5000LXR
2015 - 2016Arctic CatZR 9000El Tigre
2014 - 2015Arctic CatZR 9000Limited
2016 - 2016Arctic CatZR 9000Limited 129in
2016 - 2016Arctic CatZR 9000Limited 137in
2014 - 2016Arctic CatZR 9000LXR
2014 - 2016Arctic CatZR 9000RR
2014 - 2015Arctic CatZR 9000Sno Pro
2016 - 2016Arctic CatZR 9000Sno Pro 129in
2016 - 2016Arctic CatZR 9000Sno Pro 137in

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.