Home - Return to Previous Page
Additional Images

Gates 39G4455 G Force CVT Drive Belt High Performance

Drive Belt

39G4455
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $81.90

Application Detail

YearsMakeModelSubmodelNotes
2015 - 2015Arctic CatBearcat 2000LT
2015 - 2015Arctic CatBearcat 2000XT
2015 - 2015Arctic CatBearcat 2000XTE
2010 - 2014Arctic CatBearcat 570--
2009 - 2010Arctic CatBearcat 570Long Track
2009 - 2014Arctic CatBearcat 570XT
2014 - 2014Arctic CatBearcat 570XTE
2010 - 2011Arctic CatCFR 1000--
2010 - 2011Arctic CatCFR 8--
2010 - 2010Arctic CatCFR 8Limited
2009 - 2009Arctic CatCrossfire 1000--
2007 - 2008Arctic CatCrossfire 1000EFI
2009 - 2009Arctic CatCrossfire 1000Sno Pro
2007 - 2008Arctic CatCrossfire 1000Sno Pro EFI
2009 - 2009Arctic CatCrossfire 1000Sno Pro LE
2009 - 2009Arctic CatCrossfire 500--
2007 - 2008Arctic CatCrossfire 500EFI
2009 - 2010Arctic CatCrossfire 600--
2007 - 2008Arctic CatCrossfire 600EFI
2010 - 2011Arctic CatCrossfire 8--
2011 - 2011Arctic CatCrossfire 8Limited
2009 - 2010Arctic CatCrossfire 800--
2007 - 2008Arctic CatCrossfire 800EFI
2010 - 2010Arctic CatCrossfire 800Limited
2009 - 2011Arctic CatCrossfire 800Sno Pro
2007 - 2008Arctic CatCrossfire 800Sno Pro EFI
2009 - 2009Arctic CatCrossfire 800Sno Pro LE
2009 - 2010Arctic CatCrossFire R 1000--
2009 - 2009Arctic CatCrossFire R 1000LE
2007 - 2008Arctic CatF1000EFI
2007 - 2008Arctic CatF1000LXR EFI
2007 - 2009Arctic CatF1000Sno Pro EFI
2007 - 2009Arctic CatF5EFI
2010 - 2012Arctic CatF5LXR
2007 - 2009Arctic CatF5LXR EFI
2008 - 2014Arctic CatF570--
2007 - 2008Arctic CatF6EFI
2007 - 2008Arctic CatF6LXR EFI
2010 - 2011Arctic CatF6Sno Pro
2007 - 2009Arctic CatF6Sno Pro EFI
2010 - 2010Arctic CatF8--
2007 - 2009Arctic CatF8EFI
2011 - 2011Arctic CatF8EXT
2009 - 2009Arctic CatF8LE EFI
2010 - 2011Arctic CatF8LXR
2007 - 2009Arctic CatF8LXR EFI
2010 - 2011Arctic CatF8Sno Pro
2007 - 2009Arctic CatF8Sno Pro EFI
2010 - 2011Arctic CatF8Sno Pro Limited
2007 - 2007Arctic CatF8Sno Pro Tony Stewart EFI
2015 - 2015Arctic CatLynx 2000--
2015 - 2015Arctic CatLynx 2000LT
2010 - 2010Arctic CatM1000162in
2007 - 2009Arctic CatM1000EFI 153in
2007 - 2009Arctic CatM1000EFI 162in
2009 - 2009Arctic CatM1000LE EFI 162in
2010 - 2010Arctic CatM1000Sno Pro 162in
2007 - 2009Arctic CatM1000Sno Pro EFI 153in
2007 - 2009Arctic CatM1000Sno Pro EFI 162in
2010 - 2011Arctic CatM6153in
2007 - 2007Arctic CatM6EFI 141in
2007 - 2009Arctic CatM6EFI 153in
2010 - 2011Arctic CatM8153in
2010 - 2011Arctic CatM8162in
2007 - 2007Arctic CatM8EFI 141in
2007 - 2010Arctic CatM8EFI 153in
2007 - 2010Arctic CatM8EFI 162in
2009 - 2011Arctic CatM8HCR 153in
2010 - 2010Arctic CatM8Limited 153in
2010 - 2011Arctic CatM8Sno Pro 153in
2010 - 2011Arctic CatM8Sno Pro 162in
2007 - 2009Arctic CatM8Sno Pro EFI 153in
2009 - 2010Arctic CatM8Sno Pro EFI 162in
2009 - 2009Arctic CatM8Sno Pro LE 153in
2009 - 2009Arctic CatM8Sno Pro LE EFI 153in
2011 - 2011Arctic CatM8Sno Pro Limited 153in
2008 - 2009Arctic CatT500--
2008 - 2014Arctic CatT570--

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.