Home - Return to Previous Page
Additional Images

Gates 44G4553 G Force CVT Drive Belt High Performance

Drive Belt

44G4553
Gates® G-Force™ continuously variable transmission (CVT) belts are the ultimate, high-tech component for transferring power on your smaller recreational power sports equipment. Gates designed G-Force™ belts with durability, simplicity, performance, and value in mind, then tested them under tough conditions in controlled environments. So, whether you’re loading up your UTV for a hard day’s work or off-roading on the road less traveled, Gates recreational belt drives and power transmission solutions continue to push the limits of what’s possible so you can, too.

  • Performance, durability, simplicity and value in extreme off-road environments.
  • Flexible, high-performance materials enable grab and go mobility and responsive acceleration.
  • Extended Life — shown to outlast other aftermarket belts by up to 5X.
  • Advanced aramid tensile cords and reinforced fiber loaded undercord for durability and dependability.

Break In Procedure
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance - or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Not Available
Pricing: $113.27

Application Detail

YearsMakeModelSubmodelNotes
2010 - 2010Polaris600LX
2015 - 2015PolarisAssault RMK 800155in
2004 - 2006PolarisClassic 700--
2004 - 2004PolarisClassic 700Touring
2009 - 2010PolarisDragon 800--
2009 - 2009PolarisDragon 800146in
2008 - 2008PolarisDragon IQ 600--
2008 - 2008PolarisDragon IQ 700--
2010 - 2010PolarisDragon IQ 800--
2007 - 2008PolarisDragon RMK 700155in
2008 - 2008PolarisDragon RMK 700163in
2008 - 2010PolarisDragon RMK 800155in
2008 - 2010PolarisDragon RMK 800163in
2009 - 2009PolarisDragon SP 600--
2009 - 2009PolarisDragon SP 800--
2008 - 2008PolarisDragon SwitchBack 700--
2009 - 2010PolarisDragon Switchback 800--
2004 - 2004PolarisEDGE 700Touring
2006 - 2006PolarisFusion 700--
2005 - 2006PolarisFusion 900--
2005 - 2005PolarisFusion 90050th Anniversary
2014 - 2015PolarisIndy 800SP
2014 - 2015PolarisIndy 800SP LE
2008 - 2008PolarisIQ 700--
2008 - 2010PolarisIQ 800--
2009 - 2012PolarisIQ Shift 600--
2009 - 2009PolarisIQ Shift 600136in
2009 - 2009PolarisIQ TouringFS
2009 - 2010PolarisIQ TouringFST
2012 - 2015PolarisPro RMK 600155in
2011 - 2015PolarisPro RMK 800155in
2011 - 2015PolarisPro RMK 800163in
2014 - 2014PolarisPro RMK 800LE 163in
2015 - 2015PolarisPro RMK 800Terrain Dominator Series 155in
2015 - 2015PolarisPro RMK 800Terrain Dominator Series 163in
2008 - 2015PolarisRMK 600144in
2008 - 2015PolarisRMK 600155in
2006 - 2006PolarisRMK 600HO
2007 - 2007PolarisRMK 600HO 144in
2007 - 2007PolarisRMK 600HO 155in
2002 - 2002PolarisRMK 700136in
2002 - 2006PolarisRMK 700144in
2002 - 2006PolarisRMK 700151in
2008 - 2010PolarisRMK 700155in
2006 - 2006PolarisRMK 700159in
2010 - 2010PolarisRMK 800144in
2009 - 2015PolarisRMK 800155in
2005 - 2006PolarisRMK 900151in
2005 - 2006PolarisRMK 900159in
2006 - 2006PolarisRMK 900166in
2005 - 2005PolarisRMK 900Anniversary 166in
2010 - 2010PolarisRMK Assault 800--
2009 - 2009PolarisRMK Assault 800146in
2011 - 2014PolarisRMK Assault 800155in
2014 - 2014PolarisRMK Assault 800LE 155in
2009 - 2009PolarisRMK Shift 600144in
2009 - 2009PolarisRMK Shift 600155in
2009 - 2009PolarisRMK Shift 800144in
2010 - 2012PolarisRush 600--
2011 - 2011PolarisRush 600LX
2011 - 2012PolarisRush 600Pro R
2011 - 2013PolarisRush 800--
2011 - 2014PolarisRush 800Pro R
2012 - 2014PolarisRush 800Pro R LE
2004 - 2012PolarisSwitchBack 600--
2011 - 2011PolarisSwitchBack 600136in
2012 - 2012PolarisSwitchBack 600Adventure
2006 - 2007PolarisSwitchBack 600HO
2007 - 2007PolarisSwitchBack 600HO CFI
2012 - 2012PolarisSwitchBack 600Pro R
2004 - 2008PolarisSwitchBack 700--
2004 - 2014PolarisSwitchBack 800--
2014 - 2014PolarisSwitchBack 800Adventure
2012 - 2014PolarisSwitchBack 800Pro R
2014 - 2014PolarisSwitchBack 800Pro R LE
2006 - 2006PolarisSwitchBack 900--
2011 - 2015PolarisSwitchback Assault 800144in

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W6.0000” x H2.0000” x L9.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.